Kota Stone Flooring Installation Guide
Updated 2026-11-14
Step-by-step overview of how Kota stone flooring is laid, from base preparation to polishing.
Base preparation
A firm, level base is the most important step. Most floors use a compacted sub-base with concrete (PCC). Any settlement below will crack the stone later.
Laying
Stones are laid on a cement mortar bed, tapped level, with tight joints. Keep a slight slope in outdoor and wet areas so water drains. Use spacers or a string line for straight joints.
Curing and joint filling
Let the mortar cure before heavy use. Joints are filled with cement slurry or a matching grout.
Polishing on site
Many buyers lay natural or semi-polished stone and get it machine-polished on site after laying. This evens out small height differences between tiles.
Common mistakes to avoid
Hollow spots under tiles, too-thin stone for vehicle areas, no slope outdoors, and polishing wet areas to a slippery gloss.
Related pages
Have a question about your project?